Banner
KS type rectangular block hole graphite heat exchanger

KS type rectangular block hole graphite heat exchanger

Product Details

Structural features:

The rectangular block hole type graphite heat exchanger is a stack of unit heat exchange blocks with a rectangular cross section, which has high overall strength, good thermal shock resistance, high heat transfer efficiency and long service life. Our factory's conventional production is two series of inline unidirectional corrosion resistant 3JK type and KS type. The 3JK type side plate is a small piece, and the specifications are easy to maintain. The KS type inner plate is a whole, and the upper and lower rows of fastening studs are added to distribute the heat carrier more evenly. At the same heat transfer area, the height of the rectangular block hole type equipment is smaller than that of the round block type. The factory can produce rectangular block hole type graphite heat exchangers with other characteristics such as external connection, horizontal installation, two-way corrosion resistance, etc. according to user requirements. The KS type side plate is a whole, and the upper and lower rows of fastening columns are added to distribute the heat carrier more evenly. At the same heat transfer area, the height of the rectangular block hole type equipment is smaller than that of the round block type. The company can produce rectangular block hole graphite heat exchangers with other characteristics such as external connection, horizontal installation, two-way corrosion resistance, etc. according to user requirements.

The rectangular block hole type graphite heat exchanger is composed of a rectangular graphite head, a graphite heat exchange block, and other sealing gaskets and castings. Because the heat exchange block has an overall structure and no adhesive seams, the structure has high strength and good impact resistance.

The side plate of the water seal is cast iron, which is easy to repair and disassemble, and can also be made into a double-sided anti-corrosion structure. The device can be used as a heater and a condenser, and the material flow can be 1-4.

Technical characteristics

Longitudinal

Horizontal

Allowable pressure MPa

0.3

0.3

Design temperature ℃

-20-150

150

Executive standard: HG / T3187

Inquiry