GH type floating head tubular graphite heat exchanger
This series of graphite heat exchangers are divided into two series: GHA (inner and outer diameter of heat exchange tube: φ22 / φ32) and GHB (inner and outer diameter of heat exchange tube: φ36 / φ50). Their structures are similar. The structure of this equipment is simple, compact, and has low fluid resistance, making it possible to manufacture large-scale equipment. Golden triangle graphite equipment tubular graphite heat exchanger is divided into two structures without gas-liquid separator and with gas-liquid separator. When used as a condenser, a structure with a gas-liquid separator should be used. Generally, it is assembled by ￠ 22 / ￠ 32mm extruded graphite tube. It can also produce ￠ 25 / ￠ 37, ￠ 36 / ￠ 50mm graphite tube assembly. Heat Exchanger. The outer circle seal of the floating tube sheet is generally sealed with a packing, and an O-type rubber seal ring is also used.
Design pressure MPa
Design temperature ℃
Technical standard: HG / T3112-1998
1. All seals are easy to check
2.Low pressure drop
3.Large product specifications
4.High heat transfer efficiency
5. Cheap price
This series of graphite heat exchangers can be used as coolers and condensers. Golden triangle graphite equipment can manufacture large-scale tubular graphite heat exchanger equipment, but the pressure and temperature resistance are lower than the block-hole type. It is suitable for non-strong impact and small vibration, and it is better to be a cooler (condenser).