Banner
Home > news > Content
Analysis of common failures of tube graphite condenser
- 2021-05-05-

It is suitable for producing powdered and granular polyethylene from suspoemulsion, solution, emulsion and paste liquid raw materials. Polyethylene (referred to as PE) is a thermoplastic resin made by polymerization of ethylene. It is a high-density gastrointestinal contrast agent, which can be used as a suspension in different proportions, but is usually used together with gas to achieve the purpose of double contrast. The monohydrate salt is a colorless monoclinic platy crystal. Minerals have a relatively fixed chemical composition, and those in a solid state also have a definite internal structure; it is the basic unit that makes up rocks and ores. Vacuum paddle dryer adding time: The meaning of vacuum refers to the state of a gas below an atmospheric pressure in a given space, which is a physical phenomenon. After opening the lower head, unscrew the bolts at the bottom of the U-shaped groove of the rotor, and check the scraper for replacement every four months. In addition, there are some corrosive gases which affectTube graphite condenser.

What are the requirements for stainless steel reactors in the process of testing? The equipment is mainly composed of graphite heaters, graphite separators, graphite defoamers,Graphite condenserAnd other composition. Therefore, it needs to be flushed with water regularly to keep it open, or vacuum pumping and other measures are used to remedy it. It is a kind of monosaccharide which is widely distributed and important in nature. It is a kind of polyaldehyde electroplating paddle dryer. Adding time: Material introduction: Electroplating is to use the principle of electrolysis to plate a thin layer of other metals or other metals on the surface of some metals. The process of alloying is the process of using electrolysis to attach a metal film to the surface of metal or other materials to prevent metal oxidation. Double-effect forced circulation graphite evaporator Sale Add time: production of double-effect forced circulation evaporator The graphite evaporator is a very important part of the four major parts of refrigeration. The low-temperature condensation&"liquid GG" passes through the evaporator and exchanges heat with the outside air. The&"gas GG" absorbs heat. Achieve the effect of refrigeration. Large screw single-effect falling film evaporator adding time: single-effect evaporator overview: evaporative concentration is a widely used concentration method in food factories. The consumption of machinery has ranked first in the world for 10 consecutive years and has become an active machinery market in the world. As an important branch, the share of dryer equipment is also expanding. Consuming more steel, the equipment cost is higher. The sludge enters the guide plate of the dryer from the feeder through the chute. With the rotation of the cylinder, the sludge is guided to the inclined lifting plate and is lifted. Technical working principle of the sludge dryer: sludge The dryer can dry materials with 90 water content to finished products.


Previous: No Information

下一条: What is the role of graphite tower equipment?